1) extracts latent heat from air a) Ground Source b) Air Source c) Which option do you most normally see in a home and choice as a Type 2 when working under the main tap within heating/cooling systems. d) For data collection purposes 2) outer coil is in the ground with a moderate , stable temp. source a) Air Source b) For data collection purposes c) Ground Source d) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Equipment, Unit Function, what option should it be changed to? 3) an inside coil of the heat pump is installed within the duct system, with the outer coil outside the home. a) Central Split b) Air Source c) HOT2000 considers Heat Pumps to be the principal heating system and treats the Type 1 system as the backup system. If a Type 1 heating system was not present, what should you do? d) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Specifications, when do you change anything here? 4) a head on the wall inside with the inner coil and an outside until. a) Mini split b) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Equipment, Central Equipment Type, what are the 3 options to choose from? c) Temp. Cutoff Type is only changed when and do we change temp. rating type? d) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Equipment, Unit Function, what option should it be changed to? 5) More than one head on the inside. a) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Equipment, Central Equipment Type, what are the 3 options to choose from? b) What info should be input under Equipment Information section? c) Air Source d) Multi Split 6) Take pictures of both the inside and outside parts of the heat pump and their surrounding areas. Also record manufacturer and model #’s of each unit. a) Which option do you most normally see in a home and choice as a Type 2 when working under the main tap within heating/cooling systems. b) For data collection purposes c) Central Split d) What info should be input under Equipment Information section? 7) HOT2000 considers Heat Pumps to be the principal heating system and treats the Type 1 system as the backup system. If a Type 1 heating system was not present, what should you do? a) Select the Baseboards/Hydronic/Plenum heaters radio button and use the defaults assigned to that selection. b) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Equipment, Central Equipment Type, what are the 3 options to choose from? c) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Equipment, Unit Function, what option should it be changed to? d) Multi Split 8) Which option do you most normally see in a home and choice as a Type 2 when working under the main tap within heating/cooling systems. a) Temp. Cutoff Type is only changed when and do we change temp. rating type? b) Central Split c) What info should be input under Equipment Information section? d) Air Source Heat Pump 9) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Equipment, Unit Function, what option should it be changed to? a) Heating/cooling b) Central Split c) Ground Source d) Mini Split 10) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Equipment, Central Equipment Type, what are the 3 options to choose from? a) Central Split b) Select from central split, mini- split, or single package c) Multi Split d) Which option do you most normally see in a home and choice as a Type 2 when working under the main tap within heating/cooling systems. 11) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Specifications, when do you change anything here? a) Heating efficiency and Cooling Efficiency, leave at default if not specified. b) HOT2000 considers Heat Pumps to be the principal heating system and treats the Type 1 system as the backup system. If a Type 1 heating system was not present, what should you do? c) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Equipment, Unit Function, what option should it be changed to? d) For data collection purposes 12) Temp. Cutoff Type is only changed when and do we change temp. rating type? a) Multi Split b) Only when using heat pumps that switch off at one temperature to use a back up system and no, we leave at 8.3C c) HOT2000 considers Heat Pumps to be the principal heating system and treats the Type 1 system as the backup system. If a Type 1 heating system was not present, what should you do? d) For data collection purposes 13) What info should be input under Equipment Information section? a) On the house tree, click heating/cooling systems. On the Heat Pump - Air tab, under Equipment, Unit Function, what option should it be changed to? b) c) Air Source d) Multi Split

heat pump data collection and modelling

by
Print
Embed

Leaderboard

Visual style

Options

Switch template

Continue editing: ?