Step 1 - Create a template for the wooden base design, Step 2 - Mark out the different timber to the correct length using a try square and ruler, Step 3 - Accurately cut the material to the correct length using a bench hook and tenon saw., Step 4 - Sand or file the ends square and then glue together., Step 5 - Sand down the sides of the wooden block so that they are both flat., Step 6 - Mark out the design for the base on the side on the block, Step 7 - Cut the correct shape using appropriate tools, Step 8 - Final shaping will be done with the file or sander to achieve the correct shape, Step 9 - Mark out the metal to the correct length and also where the bends will be done., Step 10 - Cut the metal using a hacksaw, file as needed to remove the sharp edges, Step 11 - Drill the screw and wire holes in the metal, countersink the screw holes, Step 12 - Bend the metal to the correct shape, Step 13 - Drill the holes in the wooden base for the wire, Step 14 - Attach the wooden base and aluminium together adding the LED strip.,

Step by step for making the light

by
Print
Embed

Leaderboard

Visual style

Options

Switch template

Continue editing: ?