1) Which screwdriver will you use to remove the screw shown in the picture a) Torx b) Flat c) Cross d) triangular 2) To install the cables to the connector shown in the picture you need to use a) ring spanner b) flat screwdriver c) socket wrench d) cross screwdriver 3) To disassemble the relay from the TH35 rail, you need to use a) cross screwdriver b) socket wrench c) ring spanner d) flat screwdriver 4) The device shown in the picture is a) choke b) transformer c) DC motor d) AC motor 5) It is used to detect cabling discontinuities a) installation parameters meter. b) wire detector. c) a thermal imaging camera. d) cable tester. 6) Analog inputs are marked with a letter symbol in the PLC device a) AQ b) AI c) Q d) I 7) It is used to measure the pressure of liquids in hydraulic systems a) areometers b) hygrometers c) manometers d) barometers 8) The tools shown in the drawings are used for a) insulation stripping b) cutting wires c) crimping RJ45 plugs d) crimping the sleeve terminals 9) The item shown in the figure is a) pyrometer b) mercury thermometer c) resistance sensor d) capacitive sensor 10) The device connected to the PLC, marked ADMC-1801, fully in the system shown in a) communication interface. b) PLC controller power supply c) the input module d) the output module

Egzamin EE.17

by
Print
Embed

Leaderboard

Visual style

Options

Switch template

Continue editing: ?