1 -open the correct CAD program - Open 2d design, 2 -draw - Draw your vector image – you will need to learn how to do this., 3 -set the colour for lines you want cut as red - Change the colour of all lines you would like to vector cut to red., 4 -set the colour of the lines you want to etch as black - Change the colour of all lines you would like to vector etch to black., 5 -set the colour for filled areas you want to etch as black - Change the filled Rasta etch areas to black., 6 -think about which you want the laser to cut first. - Order the colours for when you want to cut them and set the power and speed for each, 7 -load the laser cutter - Put material in the top left of the laser cutter, 8 -focus the laser - Make the bed on the laser the correct height using the focusing tool, 9 -shut the lid - Make the laser cutter safe & turn on the fan, 10 -start laser cutter - Watch & wait untill the laser cutter has completely finished., 11 -remove your finished work - Check your work for quality and fit 😊,

Laser cutter process Scrambled :)

by
Print
Embed

Leaderboard

Visual style

Options

Switch template

Continue editing: ?