A ____ roof slopes down from a central point or ridge This type of roof is ____ A ____ is a factory made structural framework designed to support a roof A traditional cut roof is made ____ The ridge is the ____ part of a roof A ____ board connects rafters together on a traditional cut-roof A ____ is a horizontal timber bedded on the inner leaf of a wall, on which the ends of the rafters or trusses sit A ____ is a horizontal timber fixed to the bottom of the rafters, to which the guttering is attached A ____ is a timber that closes off the underside of the eaves and ventilates the roof void ____ is a breathable membrane to provide secondary protection to the roof (under the tile batten) ____ battens are timbers fixed to the rafter, which the tiles or slates are fixed to ____ is the distance between tile or slate rows A ____ is a support for rafters ____ is the angle or slope of the roof (10 degrees) A ____ roof detail has pitch maintained on 3 sides (no gable) A ____ is a triangular section of walling built to the pitch of the roof The lower part of the roof that overhangs the walling is called ____ A ____ is an internal junction between two pitched roofs A Wall plate ____ supports structural stability Area is calculated by ____ ____ is the measurment of a 3D object Perimeter is calculated by ____ the lengths of all sides A Ceiling ____ is timber that the ceiling is fixed to

Unit 207: Site Carpentry

by
Print
Embed

Leaderboard

Visual style

Options

Switch template

Continue editing: ?